Socket Mobile 56K Modem Card - Manual (Page 35)

CHAPTER 3: SETUP FOR CASIO BE-300 | 35
STEP 3: Install the Software
Should I install Socket’s WhereAreYou? software?
You have two options for software installation:
Option 1: Skip software installation.
The Casio BE-300 comes with a generic built-in modem driver. For basic
operation of the modem card, you can use the built-in driver and skip
software installation. If you plan to use your device’s built-in drivers, then
proceed to Step 4 to insert the modem card into your device.
Option 2: Install Socket’s enhanced software.
You can use the modem card with Socket’s WhereAreYou? software, which
is enhanced with the features listed below. If you do not need these
features, skip software installation.
• A task tray icon that makes it easy to check if you have a good
connection
• An applet that reports your connection time and speed
• An applet that lets you program the modem card to work in any
country
Software Installation
If you have not installed the software yet, follow the steps below. Make
sure to install the software BEFORE inserting the modem card.
1. Use the USB/serial cable to connect the BE-300 to a host PC.
.
2. Perform a PC Connect. For instructions, refer to the documentation that
came with your BE-300.
3. Insert
the Socket 56K Modem Installation CD into the host PC.
4. Use
My Computer or Windows Explorer to access your CD-ROM drive.
Click on SETUP.EXE.
5. Follow the instructions on your screen to install the software.
Note: The
host PC can
be a desktop
or notebook
PC.