Sony HT-SF1200 User Manual

Page 41

D:\Chin Meng's job\SONY-HA\HT-SF1200_R2\1200_data\3210767121\GB05AMP_HT-SF1200-
CEL.fm

masterpage: Right

[HT-SF1200/HT-SS1200]

3-210-767-12

(2)

Ampl

ifier O

erati

Tips

• If you set “CAL LOAD” in A. CAL menu to

“LOAD YES”, you can adjust the speakers
distance in 0.01 meter increment.

• The distance between the center speaker and the

listening position B cannot be more than 1.5
meters closer than the one between the listening
position and the front speaker A. Place the
speakers so that the difference in the length of B
in the following diagram is no more than 1.5
meters closer than the length of A.

Example: Adjust the distance B to 4.5 meters or
more when the distance A is 6 meters.
Also, the distance between the surround speakers
and the listening position C cannot be more than
4.5 meters closer than the distance between the
listening position and the front speakers A. Place
the speakers so that the difference in the length of
C

in the following diagram is no more than 4.5

meters closer than the length of A.
Example: Adjust the distance C to 1.5 meters or
more when the distance A is 6 meters.
This is important because incorrect speaker
placement is not conductive to the enjoyment of
surround sound. Please note that placing the
speakers closer than the required will cause a delay
in the output of the sound from that speaker. In
other words, the speaker will sound like it is
farther away.

x SUR POS. (Surround speaker

position)

Lets you specify the location of your surround
speakers for proper implementation of the
surround effects in the CINEMA STUDIO EX
modes (page 45).

• BEHD/HI

Select if the location of your surround
speakers corresponds to sections B and D.

• BEHD/LO

Select if the location of your surround
speakers corresponds to sections B and C.

• SIDE/HI

Select if the location of your surround
speakers corresponds to sections A and D.

• SIDE/LO

Select if the location of your surround
speakers corresponds to sections A and C.

continued