Cross tube installation, Install extension tubes – Sanus Systems LAS1A User Manual

Page 4

Text mode
Original mode

6901-100147 <01>

2: Cross Tube Installation

Slide the cross tubes [02] into the first monitor bracket
[g], through the arm assembly [H] and then through
the second monitor bracket [J]. Center the cross tubes
on the back of the TV. Using the Allen Key, tighten the
six vise assemblies until the cross tubes no longer
rotate.

[g]

[J]

[H]

[02]

3: Install Extension Tubes

Slide the four extension tubes [03] (felt end
first) into the cross tubes [02].

[03]

[02]

[03]

[02]

[03]

If you no longer have your VisionMount™ Installation

Manual, download one from www.Sanus.com or call

Sanus Systems Customer Service.

NOTE

[25]

Attach the TV and arm assembly to the wall plate
according to the instructions provided with the large
VisionMount™ Full Motion Mount.

HEAVY! You will need assistance with this step.