Sony KP 61V75 - Manual (Page 14)

14 -EN Getting Started
Connecting a DVD player with component video output connectors
Component video terminals Y/C
B
/C
R
provide a
sharper, higher resolution picture by reducing the
amount of signal processing thus creating a more
accurate reproduction of the source.
If your DVD player has component video output
connectors, connect them to VIDEO 4 IN on the
projection TV in the following way.
Notes
• Connect your DVD player directly to your TV. Connecting the
DVD player through other video equipment will cause
unwanted picture noise.
• When the DVD player is connected using VIDEO 4 IN, its
MONITOR OUT signals cannot be output.
• Some DVD player connectors may be labeled Y, B-Y, and R-Y.
In this case, connect Y (green) on the projection TV to Y on the
DVD player, C
B (blue) to B-Y, and C R (red) to R-Y.
• The jacks of this projection TV are colored in green (Y), blue
(C B ), and red (C R ). If line output connectors of your DVD player
have different colors, make connections according to their
labels.
• Because the high quality pictures on a DVD disc contain a lot of
information, picture noise may appear. In this case, reduce the
SHARPNESS level in the VIDEO menu (see SHARPNESS on
page 31).
• If the incorrect colors appear when using this component video
input, recheck the connections they may be reversed.
Rear of projection TV
DVD
Audio
outputs
Component video
outputs
RK-74A
(not supplied)
VMC-10HG
(not supplied)
C R (red)
C B (blue)
Y (green)
AUDIO-R (red)
AUDIO-L (white)
LINE OUT S VIDEO OUT COMPONENT VIDEO OUT S-LINK DIGITAL OUT
OPTICAL COAXIAL R - A U D I O 1 - L VIDEO Y C B C R
C B
C R
Y
CONTROL S
OUT
L
R
AUDIO
VIDEO 4
IN
VIDEO4
TV OUT
VIDEO1
VIDEO3
S-LINK