Sony BDP-N460 - Manual (Page 46)

46
Sets the Deep Color (color depth) setting for
video signals output from the HDMI OUT
jack.
The color depth is indicated by the number of
bits, and more colors can be reproduced as
the value increases. The player supports a
color depth of up to 12 bits. Connecting the
player and a TV that supports Deep Color
allows more accurate color reproduction than
when connecting it to a TV that does not
support Deep Color.
Sets whether to send xvYCC information to
the connected TV.
Combining xvYCC-compatible video with a
TV that supports x.v.Color display makes it
possible to more accurately reproduce object
colors present in the natural world.
Sets the picture mode for DVD playback
pause status. For BD-ROMs or discs
containing AVCHD files, “Pause Mode”
automatically switches to “Auto.”
Audio Settings
The default settings are underlined.
Selects the signal type for the HDMI OUT
jack.
b
Select “PCM” when connecting a TV or an AV
amplifier (receiver) that does not support Dolby
Digital or DTS, otherwise noise or no sound may
result.
Selects whether to mix or not mix interactive
audio and secondary audio (commentary)
when playing a BD that contains such audio.
b
PCM 96 kHz and PCM 192 kHz audio signals are
output as PCM 48 kHz audio signals when “BD
Audio Setting” is set to “Mix.”
Lowers the audio output level to prevent
sound distortion.
b
“Audio ATT” does not affect the output from the
HDMI OUT jack and the DIGITAL OUT
(OPTICAL/COAXIAL) jack.
HDMI Deep Color Output
Auto Normally select this.
12bit Outputs 12bit video signals.
10bit Outputs 10bit video signals.
Off Select this when the picture
is unstable or colors appear
unnatural.
x.v.Color Output
Auto Normally select this.
Off Select this when the picture
is unstable or colors appear
unnatural.
Pause Mode
Auto Normally select this.
Dynamic moving pictures
appear without blurring.
Frame Displays static pictures at
high resolution.
Audio (HDMI)
Auto Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM Outputs PCM signals from
the HDMI OUT jack.
BD Audio Setting
Mix Outputs the audio obtained
by mixing the interactive
audio and secondary audio
to the primary audio.
Direct Outputs the primary audio
only.
Audio ATT
On Enables Audio Attenuation.
Off Disables Audio Attenuation.