Sony BDP-N460 - Manual (Page 29)

29
Ho
oku
p
s a
nd
Set
tings
b
If no picture appears, press RETURN to
return to the previous screen, and change
the resolution setting.
2 Select “Finish,” and press ENTER.
The display asks for confirmation.
3 Select “OK” or “Cancel,” and press
ENTER.
When you select “Video” in step 6
Select an aspect ratio that matches your
TV, and press ENTER.
Select “16:9” when connecting to a wide-
screen TV or a TV with a wide mode
function.
Select “4:3” when connecting to a 4:3
screen TV without a wide mode function.
8
Select “Allow” to allow Internet
connections from BD content, and
press ENTER.
Select “Do not allow” to not allow
Internet connections from BD content.
9
Set “Quick Start Mode” to “On” or
“Off,” and press ENTER.
For details about “Quick Start Mode,”
see page 52.
10
Select “Finish,” and press ENTER.
z
• You can reset settings to their factory settings
(page 56).
• You can run “Easy Setup” again from “Easy
Setup” in “Setup” (page 56).