Use of the cooking hob, 1 operating power settings, Instructions for the user – Smeg SE2631ID1 User Manual
Page 5
Instructions for the user
21
5. USE OF THE COOKING HOB
To operate the panel of the hobs equipped with touch-controls, press the icons printed on its surface.
On first connection to the electrical mains, an operating check will be carried out automatically
and all the indicator lights will come on for a few seconds.
Under each cooking zone there is a coil called an inductor which is powered by an electronic system
and which creates a variable magnetic field. When a pan is positioned within this magnetic field, the
high frequency currents are concentrated directly onto the pan producing the heat required for cooking
the food.
After use, switch off the hotplates using the controls described in paragraph “5.3.3 Switching off
”. Never rely on the cookware detector.
5.1 Operating power settings
Below, we provide a table with the maximum power consumptions of the cooking zones that are on.
ZONE
NUMBER
ZONE
DIAMETER
MAX ABSORBED
POWER
ABSORBED POWER IN
POWER FUNCTION
160 mm
2000 W
Not available
210 mm
3100 W
Not available
280 mm
2800 W
Not available
280 mm
3200 W
3600
230 mm
2800 W
3100
160 mm
2000 W
2200