Seagate Barracuda ST3300631A - Manual (Page 11)

Barracuda 7200.8 PATA Product Manual, Rev. F 5
*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment
and formatting.
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and
power to operational levels.
Altitude, nonoperating
(below mean sea level, max) –60.96 m to 12,192 m
(–200 ft. to 40,000+ ft.)
Operational Shock (Gs max at 2 msec) 63
Non-Operational Shock (Gs max at 2 msec) 300 Gs
Vibration, operating 5–22 Hz: Limited displacement
23–350 Hz: 0.5 G acceleration
Vibration, nonoperating 5–22 Hz: Limited displacement
23–350 Hz: 5.0 Gs
Drive acoustics, sound power (bels)
Idle** 2.8 (typical)
3.4 (max)
Performance seek 3.7 (typical)
3.9 (max)
Nonrecoverable read errors 1 per 10 14 bits read
Annualized Failure Rate (AFR) 0.34%
Service life 5 Years
Warranty 5 years on distribution units.
To determine the warranty for a specific drive, use a
web browser to access the following web page:
www.seagate.com/support/service/
From this page, click on the “Verify Your Warranty”
link. You will be asked to provide the drive serial
number, model number (or part number) and country
of purchase. The system will display the warranty
information for your drive.
Contact start-stop cycles
(25°C, 50% rel. humidity) 50,000
Drive specification ST3400832A ST3400632A