Sharp 20F540 L - Manual (Page 8)

8
Dimension: 140mm x 215mm
Quick Reference Control Operation
• Part Names
Quick Reference Control Operation (Continued)
20F540 8
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
• The TV set and remote control illustrations and the on-screen displays in this manual may differ from their actual
appearance.
1 2 3
4 5 6
7 8 9
0 100
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
Basic Remote Control Functions
POWER
Press
→ On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 3
3. )
VOLUME UP/DOWN
(k) Increases sound.
(l) Decreases sound.
• Changes or selects the TV
adjustments on On-Screen Display.
MENU
Press
→ Accesses MAIN MENU.
Press again → Exits MAIN MENU.
DVD/VCR CONTROL
See page 4
0 .
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, signals sent will be
for TV and VCR control.
In CATV/DVD position, signals sent will
be for cable TV converter and DVD
control.
Infrared Transmitter Window
DISPLAY
Press
→ Displays receiving channel for
4 seconds.
Press again
→ Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press
→ Switches to external video
INPUT 1 mode.
Press twice
→ Switches to external
video INPUT 2 mode.
Press 3 times
→ Switches to external
video INPUT 3 mode or COMPONENT
mode.
Press 4 times
→ Switches back to the
original TV mode. See page 3 8 .
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. See page 4
0 .
CHANNEL UP/DOWN
(a) Selects next higher channel.
(s) Selects next lower channel.
• See pages
30 –3 2 for Channel
Setting.
• Moves the “ E ” mark on the MENU
screens.
MUTE
Press
→ Mutes sound.
Press again → Restores sound.
• When sound is muted, CLOSED
CAPTION appears if available.