Sharp TINSE2026QSZZ - Manual (Page 102)

100
SYSTEM SETTINGS (ADMINISTRATOR)
PROGRAMS FOR PRINT MODE PROGRAMS FOR NETWORK SCANNER MODE
Program name
Factory default
settings
Page
PRINT SETTINGS
DEFAULT SETTINGS
PROHIBIT NOTICE PAGE
PRINTING Disabled 111
PRINT DENSITY LEVEL 3 111
PROHIBIT TEST PAGE
PRINTING
*4
Disabled 111
ROTATED PRINT Enabled 111
FORCED OUTPUT OF
PRINT Disabled 111
EXCLUDE BYPASS-TRAY
FROM ATS Enabled 111
DISABLE DEFAULT
SETTING CHANGES
*4
Disabled 111
INTERFACE SETTINGS
HEXADECIMAL DUMP
MODE
*4
Disabled 112
I/O TIMEOUT 180 (sec)
60 (sec)
*4
112
USB PORT EMULATION
SWITCHING
*4
PCL 112
NETWORK PORT
EMULATION SWITCHING
*4
AUTO 112
PORT SWITCHING
METHOD
*4
SWITCH AT
END OF JOB 113
ENABLE USB PORT *4 Enabled 113
ENABLE NETWORK
PORT
*4
Enabled 113
NETWORK SETTINGS *4
IP ADDRESS SETTING DHCP: Enabled 113
ENABLE TCP/IP Enabled 113
ENABLE NetWare Enabled 113
ENABLE EtherTalk Enabled 114
ENABLE NetBEUI Enabled 114
RESET THE NIC — 114
INITIALIZE AND/OR STORE SETTINGS *4
RESTORE FACTORY
DEFAULTS — 114
STORE CURRENT
CONFIGURATION — 114
RESTORE
CONFIGURATION — 114
Program name
Factory default
settings
Page
SCANNER SETTINGS *1
INITIAL FILE FORMAT
SETTING • File type: TIFF
• Compression
mode: G4
• Number of pages
per file: All
115
INITIAL QUALITY
SETTING • Original image
type: Text/Photo
• Exposure: Auto
115
INITIAL RESOLUTION
SETTING 300 dpi 115
DEFAULT DISPLAY
SETTINGS CONDITION
SETTINGS 115
THE NUMBER OF DIRECT
ADDRESS / SENDER KEYS
DISPLAYED SETTING 8 (keys) 115
*1 Appears when the scanner function is enabled.
*2 Appears when a FINISHER is installed.
*3 Can be enabled when a JOB SEPARATOR TRAY KIT
or FINISHER and Right tray are installed.
*4 Appears when the PRINTER EXPANSION KIT is
installed.
*5 Appears when the PRINTER EXPANSION KIT and
EXPANSION MEMORY are installed.
06_keyope.fm 100 ページ ２００９年７月８日 水曜日 午前１０時１２分