Operations, 1 your new hob with touch-control operation, 2 touch-control keys – Smeg SE2631TC User Manual

Page 19: 3 touch-control operations

224379

Operations

1.1 Your new hob with Touch-Control operation

This manual covers the model SE 2631 TC.

1.2 Touch-Control keys

After the supply voltage has been connected (mains connection), a self-test is carried out which is concluded when
a short acoustic signal is to be heard.

On/off key (control)

Locking key

Control lamp lock (control)

Minus key

Plus

key

Cooking zone key

Cooking level display

Cooking zone stand-by dot

(lit: cooking zone can be used)

1.3 Touch-Control operations

Each key operation is always confirmed by an acoustic signal.

Pressing the on/off switch key

switches on the control system. Put your finger on the button until a “0” lights up

at all of the cooking level displays and the cooking zone stand-by dot

flashes. The next action must be carried

out within ten seconds, otherwise the control system will automatically switch off again.

To switch on a cooking zone, press the corresponding cooking zone key

of the required cooking zone. The

appropriate cooking zone stand-by dot

of the activated cooking zone lights up.

Select a cooking level from 1 to 9 by means of the minus or plus keys

. When switched on, each cooking zone

can be switched off again at any time. To do this, the required cooking zone must be activated; the cooking zone
stand-by dot

lights up.

The minus key

can be used to turn the cooking level down to “0”; if the minus and plus keys

are pressed

at the same time, the cooking zone can be switched off directly.

In all cases the complete control system can be switched off at any time by pressing the on/off key

. To switch

off the entire cooking range place your finger briefly on the on/off key

until the control lights go out.

Pressing locking key

prevents all the keys - with the exception of the on/off key

from being operated by

mistake. Successful locking is indicated by the control lamp

. Pressing the locking key

cancels this command

again.

Residual heat display

Residual heat is displayed by means of an illuminated “H” on the appropriate cooking level display