Cooling your room – Samsung ASHM070VE User Manual
Page 10
You must select the Cool mode if you wish to adjust the:
◆ Cooling temperature
◆ Fan speed when cooling
1
If necessary, press the (On/Off) button.
Result:
◆
The OPERATION indicator on the indoor unit comes on.
◆
The air conditioner starts up in the mode selected when
the unit was last used.
◆
The indoor unit beeps.
The air conditioner is fitted with a protection mechanism to
prevent the unit from being damaged when it is started
immediately after being:
◆
Plugged in
◆
Stopped
It will start up normally after a three-minute.
2
If the indication is not displayed at the top of the remote control,
press the button on the remote control one or more times until it
appears.
Result:
◆
The indoor unit beeps each time you press .
◆
The air conditioner starts up in Cool mode.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
You can change modes at any time.
3
To adjust the temperature, press the or
buttons one or more
times until the required temperature is displayed.
Possible temperatures are between 18°C and 30°C inclusive.
Result:
◆
Each time you press or
:
- The temperature is adjusted by 1°C
- The indoor unit beeps
◆
The air conditioner starts cooling, provided that the room
temperature is higher than the selected temperature;
the fan will, however, operate.
4
Select the fan speed by pressing the button one or more times
until the required setting is displayed:
Low
Medium
High
Automatic
Result:
Each time you press , the indoor unit beeps.
5
To control the direction of the air flow, refer to page 15.
Cooling Your Room
MODE TURBO OFF
MODE TURBO OFF
IMPORTANT
IM
MODE
MODE
MODE TURBO OFF
To perform 3-unit operation, refer to page 25,
and select the appropriate operation mode.
E-
10