Sharp LC-22DV27UT - Manual (Page 34)

32
Icon Selected item Description
Language *1 Menu *1
Subtitle *1
Audio *1
English / Francais /
Espanol
The selected language will be heard or seen.
Other Other language can be selected (see the “Language code
list” on page 34).
Off (subtitle) Subtitles do not appear.
Original (Audio) The unit will select the first priority language of each disc.
Picture TV Screen *2 4:3 (Letter
box)
When playing back a wide screen-DVD disc, it displays
the wide picture with black bands at the top and bottom of
screen.
4:3 (Pan
Scan)
It displays the wide picture on the whole screen with left and
right edges automatically cut off.
16:9 (Wide) Select this mode when connecting to a wide-screen TV.
A wide screen picture is displayed full size.
Display *3 Off / On On screen display can be switched on or off when you press
any buttons.
Picture Mode There are two types of source content in pictures recorded in DVD video discs:
film content (pictures recorded from films at 24 frames per second) and video
content (video signals recorded at 30 frames per second). Make this selection
according to the type of content being viewed.
Auto
Select this position normally. The DVD player automatically
detects source content, film or video, of playback source.
Film Suitable for playback of film content pictures.
Video Suitable for playback of video content pictures.
JPEG Interval *4 You can continuously playback all JPEG files automatically.
Off
Plays back one file at a time.
5 / 10 / 15
Seconds
Displays images in the form of a slide show.
Every 5 / 10 / 15 seconds the image changes.
Audio Night Mode *5 Night Mode enables you to control the dynamic range so as to achieve a
suitable sound for your equipment.
Off
It plays back at the recording level on the disc.
On Loud sound such as explosion or similar is toned down
slightly when played back. This makes it suitable for when it
is connected to a stereo.
Digital Out *6 You can select the digital output sound format corresponding to your system
connection.
Off
There is no sound output from DIGITAL AUDIO OUT jack.
PCM Change Dolby Digital to PCM for the output.
Select when connected to a 2 channel digital stereo
amplifier.
Bitstream Disc audio bitstream data will be output.
Setup Parental See page 33.
Password
Function Setup
NOTE
*1 If the selected language is not recorded on the disc, the first priority language is selected.
*2 If the DVD disc is not formatted in the pan & scan style, it displays 4:3 style.
*3 If “Display” is not set to “On” on screen displays do not appear when you press any buttons except SUBTITLE, PLAY
MODE, MARKER, DIRECT SKIP, DISPLAY and AUDIO.
*4 You cannot display DVD SETUP screen when disc is playback
*5 This function works only during playback of Dolby Digital recorded discs.
*6 Even if you select “Bitstream”, MPEG audio will be output in PCM format.
52J0131C.indb 32 52J0131C.indb 32 6/24/09 5:35:22 PM 6/24/09 5:35:22 PM