Sharp LC-22DV27UT - Manual (Page 10)

8
LC-19DV27UT
LC-22DV27UT
Remote control unit
(X1)
Page 10
“AA” size battery
(X2)
Page 10
AC cord (X1)
Page 9
Cable Tie (X1)
Page 9
Screw (X3)
Page 8
Operation manual
(X1)
NOTE
• Always use the AC cord supplied with the TV/DVD.
Supplied accessories
Make sure the following accessories are provided with the product.
To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are
available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD- CLOTH- 3) packs. Call 1-800-BE-SHARP
for ordering, or VISIT www.sharpusa.com/SharpDirect.
QUICK REFERENCE
Attaching the stand
Ventilation & Cleaning Tips
Keep your TV/DVD in a well ventilated area and make sure not to place it by a heat source or use near
water. The TV/DVD is designed for AC use only and should be used with supplied AC cord.
Clean the screen by spraying a soft lint free cloth with water to lightly moisten.
Gently wipe and avoid pressing on the screen. To clean the outer cabinet, use the same method.
Do not use liquid or aerosol cleaners.
The screen is glass and can be scratched or broken when dropped or impacted.
Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
•
•
1 Confirm the 3 screws supplied with the TV.
Screws (
X 3)
2 Remove the covering sheet of the stand.
1
Insert the stand to the bottom of the TV.
2
Insert and tighten the 3 screws into the 3 holes on the
bottom of the stand.
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
•
•
NOTE
• To detach the stand, perform the step in reverse order.
Soft cushion
Screw
3 For protection, sheets
are covering the product.
Please remove these
sheets before use.
52J0131C.indb 8 52J0131C.indb 8 6/24/09 5:34:58 PM 6/24/09 5:34:58 PM