Schneider Electric Lexium 17S Series - Manual (Page 117)

105
Drive Cables, continued
Fiber Optic
Cables Parts
Table The following table lists part numbers for SMA 1000 micron plastic SERCOS fiber
optic cables. These cables range in length from 0.3...38 m. Each cable terminates
with an SMA type connector.
CAUTION!
The minimum bend radius for these fiber optic cables is 25 mm (1 inch). Do NOT
exceed this bend radius.
Failure to stay within the 25 mm (1 inch) bend radius can result in damaged
cables.
The maximum tensile load during installation is 25 Kg/cable. Operating
temperature is -40
° C ... 80 ° C.
Part Number Description Length (m)
990MCO00001 1 ft cable 0.3
990MCO00003 3 ft cable 0.9
990MCO00005 5 ft cable 1.5
990MCO00015 15 ft cable 4.6
990MCO00025 25 ft cable 7.6
990MCO00035 35 ft cable 10.7
990MCO00045 45 ft cable 13.7
990MCO00055 55 ft cable 16.8
990MCO00065 65 ft cable 19.8
990MCO00075 75 ft cable 22.9
990MCO00085 85 ft cable 25.9
990MCO00095 95 ft cable 29
990MCO00105 105 ft cable 32
990MCO00115 115 ft cable 35
990MCO00125 125 ft cable 37.5
990MCI00008 Bulk head connector -