Schneider Electric Lexium 17S Series - Manual (Page 111)

99
Wire Specifications (Recommended)
Wire
Specifications The following table lists the recommended wire specifications. Use only copper wire
with insulation rated at 75
°
C or greater, unless otherwise specified.
Item Drive Model No. Wire Size Notes
AC mains MHDS1004N00
MHDS1008N00
MHDS1017N00
MHDS1028N00
1.5 mm
2
(14 AWG)
MHDS1056N00
4.0 mm
2
(12 AWG)
Protective earth All 4.0 mm 2 (12 AWG)
DC Link MHDS1004N00
MHDS1008N00
MHDS1017N00
MHDS1028N00 1.5 mm 2 (14 AWG) Shielded for lengths
greater than 20cm
MHDS1056N00 4.0 mm 2 (12 AWG) Shielded for lengths
greater than 20cm
Analog signals All 0.25 mm 2 (22 AWG)
minimum
Twisted pairs,
shielded
Digital I/O and Fault
Relay All 0.5 mm 2 (20 AWG)
minimum
Brake All
1.0 mm
2
(18 AWG)
minimum
Shielded
Bias power All 2.5 mm 2 (14 AWG)
maximum
Optional external
Regen resistor All 1.5 mm 2 (14 AWG) High temperature
insulation (155 ° C or
greater)