Samsung ML 2550 - Manual (Page 75)

U SING P RINT M ATERIALS 4.12
9 After printing, push the extender back to its place and close
the Multi-Purpose Tray.
Using the Manual Feed Mode
If you select Manual Feed in the Source option when changing
print settings, you can manually load a sheet of print material in
the Multi-Purpose Tray. Manually loading paper can be helpful
when you want to check the print quality after each page is
printed.
This loading procedure is almost the same as the procedure for
loading in the Multi-Purpose Tray, except you load paper
sheet-by-sheet in the Tray, send print data to print the first
page, and press the On Line/Continue button (
) on the
control panel to print each following page.
1 Load a sheet of print material on the centre of the
Multi-Purpose Tray with the print side up.
2 Slide the paper width guide and adjust it against the
material without bending.