beautypg.com

How to set the oven for self-cleaning, How to delay the start of self-cleaning, How to turn off the self-cleaning feature – Samsung FTQ352IWUX User Manual

Page 39: After a self-cleaning cycle

background image

Maintaining your appliance _

9

05
MAINT

AINING YOUR APPLIANCE

How to set the oven for self-cleaning

1. Select the length of time for the self-cleaning operation, eg. 3

hours.

Press the

SELF CLEAN pad once for a 3 hour clean time, twice

for a 4 hour clean time, or 3 times for a 2 hour clean time.

The default setting is 3 hours.

2. Start the self-cleaning cycle.

Press the

SET/START pad. The motor-driven door lock will

engage automatically.

You will not be able to start a self-cleaning cycle if the control lockout feature is activated
or if the oven’s temperature is too hot.

The oven door locks automatically. The display will show the clean time remaining. It
is not be possible to open the oven door until the temperature drops to a safe/cool
temperature.

The self-cleaning feature will not operate when warming center or warming drawer is on.

How to delay the start of self-cleaning

1. Press the SELF CLEAN pad.

Select the desired self-clean time by pressing

SELF CLEAN pad.

2. Press the DELAy START pad.

. Using the CLOCK AM/PM and number pads, enter the time you want the clean cycle to start.

. Press the SET/START pad.

The display will show

Delay, Self clean and Lock icon. And the motor-driven door lock will

engage automatically.

. Self-Cleaning cycle will turn on automatically at the set time.

How to turn off the self-cleaning feature

You may fi nd it necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fi re
in the oven. (When the self-cleaning cycle is done, End will show in the display and a beep will
sound 6 times.)

1. Press the CLEAR/OFF pad.

2. You will be able to open the oven door once the oven has cooled down for approximately 1

hour.

After a self-cleaning cycle

You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
(If white spots remain, remove them with a soap-fi lled steel wool pad and rinse thoroughly with
a vinegar and water mixture.)

If the oven is not clean after one cycle, repeat the cycle.

You cannot set the oven for cooking until the oven is cool enough for the door to unlock.

FTQ352IWUX_XAA DG68-00104A.indd 39

2007-08-24 ¿АИД 6:17:32

This manual is related to the following products: