Sony PEG-N610C - Manual (Page 25)

25
Setting up your Sony CLIE Handheld – Basics
Chapter 2
3
Press lightly on the screen with the stylus.
This action is called “tapping.”
The digitizer calibration screen appears. Calibration aligns the
internal circuitry of the handheld with its touch-sensitive screen so
your CLIE handheld can detect the task you want to perform when
you tap an element onscreen.
4
Tap anywhere onscreen.
The following screen is displayed.
5
Following the instruction onscreen, tap the center of the
displayed mark.
Note
If the digitizer is not configured correctly, the scroll bar may not operate
properly, “tapping” may not work as expected, or other problems may
occur. If this happens, please re-configure the digitizer manually. You can
also re-configure the digitizer in the Digitizer Preferences screen. For details,
see “What you can do with Preferences” in the Operating Instructions
manual.
Continued on next page