Samsung Msys SF-830 - Manual (Page 53)

C OPYING 3.8
4 Adjust the paper guide to the width of the stack of print
material.
Make sure that you have not loaded too much print media.
The stack should be under the max. fill line. The print media
buckles if you load a stack that is too deep, or push it in too
far.
N OTE : When printing on the
used paper from the bypass tray,
the printed side should be facing
up and the edge without curl at
the left side. If you experience
problems feeding paper, turn the
paper around.
Max. fill line