Scientific Atlanta EPX2203 - Manual (Page 12)

4004041 Rev A WebSTAR DPX2203 or EPX2203 VoIP Cable Modem User’s Guide 11
Functions of the Front Panel Lights
Initial Power Up, Calibration, and Registration
The following chart illustrates the sequence of steps and the corresponding
appearance of the front panel lights on the cable modem during power up,
calibration, and registration on the network. Use this chart to troubleshoot the power
up, calibration, and registration process of your cable modem.
Note: After the cable modem completes step 8 (Registration Completed), the
modem proceeds immediately to Normal Operations, on page 12.
Front Panel Lights During Initial Power Up, Calibration, and Registration
Step 1 2 3 4 5 6 7 8
Front Panel
Light
Power
Up
Self
Test
Downstream
Scan
Downstream
Signal Lock
Ranging Requesting
IP Address
Registering Registration
Complete
1 Power On On On On On On On On
2 Receive Off On Off Off Occasional
Blinking
Occasional
Blinking
Occasional
Blinking
On
3 Send Off On Off Off Occasional
Blinking
Occasional
Blinking
Occasional
Blinking
On
4 Cable Off On Slow Blinking
1 Blink
Momentary
On
Off Blinking 2
Blinks
Blinking 4
Blinks
On
5 PC 1 Off On Off, On or
Blinking
Off, On or
Blinking
Off, On or
Blinking
Off, On or
Blinking
Off, On or
Blinking
Off or On
6 Line 1 Off On Off Off Off Off Off Off
7 Line 2 Off On Off Off Off Off Off Off
1 The PC light is on whenever a PC is connected to the modem, and it blinks to indicate that data is being transferred. If the
modem is used to provide telephone service only and is not connected to a PC, the PC light is off.
Continued on next page