Ruger Caulking Gun - Manual (Page 5)

5
LOCKING DEVICE
INSTALLATION INSTRUCTIONS
WARNING – USE OF LOCKING DEVICES
• Always keep your firearm pointed in a safe direction,
including when you are installing or removing your
locking device.
• Always verify that your firearm is completely unloaded
before installing your locking device.
• Do not install locking devices in the trigger guard;
always keep your fingers and locking device outside the
trigger guard during device installation and removal.
• Store firearms, ammunition and keys separately and
securely, away from children and careless adults; do not
store your firearm with the keys in the locking device.
• Do not attempt to work the action of your firearm with
the locking device in place; this may damage your
firearm.
• While locking devices are an important aid to security
measures, they are not a substitute for safe firearm
handling and proper storage. Remember that any
mechanical device can be bypassed with enough time,
knowledge, determination and equipment.
LOCKING DEVICES MUST BE USED
SAFELY AND RESPONSIBLY
Use the Correct Lock: While the basic locking device is substantially
similar for all Ruger
® firearms, due to the different shapes of the many
Ruger ® firearms, some firearms utilize different locking devices. The 1 1/2”
lock (without the vinyl coating) is for use with RUGER ® NO. 1 Rifles. It
is very important to use the correct locking device!
To Install the Factory-Supplied Locking Device:
1. Keep the muzzle pointed in a safe direction and your fingers outside the
trigger guard at all times!
2. Be sure the firearm is completely unloaded and contains no cartridges or
cartridge cases!