Ruger Caulking Gun - Manual (Page 15)

When there is a cartridge in the
chamber and the safety selector is in the
“Fire” position, the cartridge will
discharge if the trigger is pulled. It is
absolutely essential for the user to know
how to completely unload it.
“Completely” means fully opening the
lever, removing a chambered cartridge,
and checking to be sure the rifle is
empty.
The safety selector should always
be in the “Safe” position when the rifle
is being unloaded.
See the “Operation of
Safety” section of this manual.
ALWAYS CHECK TO BE
SURE RIFLE IS UNLOADED
15
1
2
3
SAFETY IN
"SAFE"
POSITION
CORRECT UNLOADING SEQUENCE
TO UNLOAD RIFLE
(Keep the Rifle Pointed in a Safe Direction)
UNLOAD THE RIFLE IMMEDIATELY WHEN YOU ARE FINISHED SHOOTING.
1. Move the safety selector fully to the “Safe” position if the rifle is cocked.
2. Depress the lever latch and fully lower the lever to open the breech and to
eject the chambered cartridge.
3. Inspect the chamber to be certain the cartridge has been extracted. Leave the
breech block open.
WARNING – UNLOADING