Shelby CS-500S User Manual

Page 5

. .

WARNINGS:

As with any product that performs automatic functions, there are certain

safety precautions that you must practice and be aware of.

1. Keep ALL transmitters out of the reach of children.

2. The use and operations of this system is the sole responsibility of the

operator.

IMPORTANT NOTICE

OPERATION

A. REMOTE TRANSMITTER OPERATION:
Transmitter

Button

System Function or Feature

Remark

Lock Doors & Arm System

Arm and Delete The 2 Stage Shock Sensor. Press twice within 3 seconds

- -

Arm and Noiseless Mode

Press within 3 seconds

Arm System and Hidden Alarm Function

Press within 3 seconds

Silent Arming / Disarming

Ignition in "off" position.

+ (2-sec.) Active Anti Car-Jacking Mode

Ignition in "on" position press

and hold for 2 seconds

Unlock Doors & Disarm System

Two Steps Door Unlock & Disarm System

Press twice within 3 seconds.

(2-sec.)

Trunk Release (Channel 3)

Press and Hold for 2 seconds

Passive Arming By-pass

While the system Disarmed.

- -

Remote Control Entry/Exit Valet Mode

While the system Disarmed,

Press within 3 seconds

Channel # 4 Timer Output
Car Locator

(3-sec.)

Panic function

Press and Hold for 3 seconds.

4. Press the F button once again then the Minutes digit flashes

for adjusting.

5. Press the or button to decrease or increase the Minute digit

until 2:30.

6. Press the F button once again then icon flashes for the alert

alarm ON / OFF setting

7. Press the button to start the count down timer, and the ON icon

will display on the LCD screen. Press the button to stop the count

down timer, and the OFF icon will display on the LCD screen.

8. Press the F button for 2 seconds with one-melody sound to

confirm exiting the timer program mode.

Note: Maximum is 19 hours.

LCD REMOTE CONTROL TRANSCEIVER