Shelby CS-500S - Manual (Page 9)

. .
. .
9 20
I. ACTIVE DISARMING – UNLOCK AND DISARM:
1. Press the button on the transmitter.
2. The siren will chirp [2] times and the parking lights will flash [2]
times and then remain “ON” for 30 seconds to indicating that the
security system is now “Disarmed”.
3. The vehicle’s doors will unlock and the dome light will turn on for 30
seconds upon disarming.
System Doors Trunk/Hood Shock Sensor
Disarm Trigger Trigger Trigger
OPERATION
Ignition Trigger CLEAR THE FLASH ICON: Pressing the F button 3
times within 3 seconds will clear the flash icon on
the LCD screen transceiver.
TAMPER DISARMING: If the alarm is triggered, upon
disarm of the system, the siren will chirp 4 times and
the parking lights will flash 3 times.
PATHWAY ILLUMINATION: This
feature turns the parking light “ON” for 30 seconds
upon an unlock signal and for 10 seconds for a lock
signal.
Two Step Door Unlock: This feature will independently unlock the
driver’s door only when disarming the security system. Pressing the
button a second time within 3 seconds will unlock the other doors.
Automatic Rearm: If this feature is selected, the security system will
automatically re-arm itself in 60 seconds after disarming with the remote
transmitter. “Automatic Rearm” will cancel if any door is opened
before the 60 second timer has elapsed.
1. Screen Lamp ON: Press and hold the F button for [1] second, the
melody will sound and the LCD screen light will turn “ON” for 5 seconds.
2. Power Save Mode: While in power save mode, the LCD
remote transmitter uses “0” current to save the battery
power.
Entry: Press and hold the F button for 5 seconds, with one
melody sound and SAVE icon on the screen to indicate entry
of the “power save mode”.
Exit: Press any button on the LCD remote transmitter to exit
the “power save mode”.
3. Clear the Flash Icon and Melody Sound: Pressing the F button
3 times within 3 seconds will clear the flashing icon and the melody
sound on the LCD screen transceiver.
4. Stop The Trigger Melody Sound: While triggering the alarm the LCD
screen will alert the user through a melody sound and flashing trigger
icon, press any button on the LCD remote transmitter to stop the melody
sound only.
5. Button Lock: It is useful if you want to disable the trans-
mission function of the remote transmitter temporarily to
prevent any accidental pressing of buttons. Press the F button
then within 3 seconds press and hold the ( ) button for 2
seconds to activate or cancel the button lock function, the
icon will display on the LCD screen to show the LCD remote
transmitter is on “button lock”.
6. Vibration / Melody Mode: It is useful when you are in a
noisy place and difficult to hear the beep sounds from the
remote control. The remote will vibrate when the security
system is violated. Press the F button first, then
within 3 seconds press and hold the ( ) button for 2
seconds to select the mode of vibration or melody. The
icon will be displayed on the LCD screen to show the remote transceiver
is on vibration mode.
7. Enable/Disable Bi Sound while Pressing Button:
It has a short “bi” sound while pressing the button of the LCD remote
transmitter. If you want to mute the sound, press the F button first then
within 3 seconds press and hold the (Bi) button for 2 seconds to
disable the sound.
LCD REMOTE CONTROL TRANSCEIVER