Sony VPL-AW10 - Manual (Page 22)

22
2
Press the ? / 1 (On/standby)
switch to turn on the projector.
The
? / 1 (On/standby) indicator
flashes in green, and then lights in
green.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of
the connected equipment.
4
Press INPUT to project the
picture on the screen.
Each time you press the button, the
input indication and equipment to be
projected change. (
1 page 27)
Tips
• You can select the desired language for the
menu screen. For details, refer to “Step 4:
Selecting the Menu Language”. (
1 page 25)
• When “Auto Input Search” is set to “On” in
the Function menu, the input terminal
with effective signals is automatically
displayed by pressing INPUT. (
1 page 48)
5
Move both LENS SHIFT dials
(VPL-AW15 only) to adjust the
picture position.
(VPL-AW15 only)
Flashes in green for
a few seconds, and
then lights in green.
To adjust the
horizontal position
To adjust the vertical
position