Sony VPD-LE100 - Manual (Page 5)

5.0 Performance Specifications
This device shall employ the use of 3 Texas Instruments high-resolution 1.1-inch
DMD chips. This device shall provide a light output of 10,000 ANSI lumens, when
measured using a 1280 x 1024 native resolution signal.
This device shall include a standard power zoom / focus / shift lens, and other
lenses shall be available as options for a variety of short-throw and long-throw
applications.
This device shall have a minimum RGB resolution of 1280 by 1024 pixels and a
minimum video resolution of 600 TV lines.
An automatic dot-phase adjustment technology shall be employed to optimize the
display to the input source without user intervention.
This device shall employ the use of a flat-spectrum xenon lamp system, providing
for optimum balance between the red, green and blue color spectrum.
This device shall employ the use of a 2-3 pulldown technique for accurate and
detailed reproduction of film originating source material.
A 13-bit signal processing shall be employed for accurate, smooth reproduction
of color and grayscale images.
6.0 Dimensional Information
This device shall have maximum cabinet dimensions of 13.75 inches high by
28.63 inches wide and 37.38 inches deep.
This device shall not weigh more than 209 pounds.
7.0 Connectivity Information
This device shall provide for connection of 4 source devices simultaneously,
without employing the use of an external switching device. One of these
connections shall be a standard input on the device, with 3 available for custom
configuration. The standard connection shall include the following:
RGB Computer / Component Video / HDTV Video (Sync on Green, Composite,
or Separate Sync) on BNC Connectors
Optional Modules shall allow for the following connections:
RGB Computer / Component Video (Sync on Green, Composite, or Separate
Sync) on BNC Connectors