Schwinn 438 - Manual (Page 9)

7
A
S
S
E
M
B
LY
I
N
S
T
R
U
C
T
IO
N
S
ASSEMBL
Y INSTRUCTIONS
Parts
#2 Console (Qty 1)
#3 Fan Assembly (Qty 1)
#19 Static Handlebar (Qty 1)
Step 2—Assemble the Console
2–1 Remove the six (6) Round Head
Machine Screws (#1) from the
Console (#2).
2–2 Attach the Console (#2) to the
Static Handlebar (#19) with the
six (6) Round Head Machine
Screws (#1) you removed in the
previous step.
2–3 Separate the two halves of the
Fan Assembly (#3) by removing
the fi ve (5) screws.
2–4 Place the rear half of the Fan
Assembly (#3) on the back of
the Static Handlebar (#19).
2–5 Place the front half of the Fan
Assembly (#3) on the front of
the Static Handlebar (#19), and
reinstall the fi ve (5) screws you
removed from the Fan Assembly
(#3) in step 2–3.
2–6 Plug the Fan Assembly (#3) into
the Console (#2).
Figure A–2
19
1
1
3
2
Fan Screw