SIIG 104-0722A - Manual (Page 5)

5
2. Right click Computer, click Manage, click
Device Manager .
3. Insert the driver CD. Starting from top,
right click PCI Serial Port, click Update
Driver Software
. Close the AutoPlay box if
displayed.
4. Click Browse my computer for driver
software .
For 32-bit: Type in D:\32-bit, then click
Next . (Change D: to match your CD/DVD-
ROM drive letter)
For 64-bit: Type in D:\64-bit, then click
Next . (Change D: to match your CD/DVD-
ROM drive letter)
5. At Windows has successfully updated
your driver software , click Close.
6. Repeat steps 3-5.
7. Right click PCI Simple Communications
Controller , click Update Driver Software.
8. Repeat steps 4-5 to complete the installation.
Windows Vista (32-/64-bit)
1. Install the board and boot up Windows.