SIIG 104-0722A - Manual (Page 12)

12
2. Check Specify a location, uncheck the other
box, insert the driver CD, type in D:\ME,
then click Next. (Change D: to match your
CD/DVD-ROM drive letter)
3. Click Next, then Finish.
4. Type in D:\ME, then click OK to complete
the installation. (Change D: to match your
CD/DVD-ROM drive letter)
Windows 98 / 98SE
1. At the Add New Hardware Wizard, click
Next .
2. Select Search for the best driver for your
device. (Recommended) , then click Next.
3. Select Specify a location, uncheck the other
boxes, insert the driver CD, type in D:\9x,
then click Next. (Change D: to match your
CD/DVD-ROM drive letter)
4. Click Next, then Finish. If prompted, at the
Insert Disk box click OK. Type in D:\9x,
click OK to complete the installation.
(Change D: to match your CD/DVD-ROM
drive letter)