Samsung RB215AB - Manual (Page 14)

1_ Setting Up
4. Remove the screw that holds the
ground wire.
5. Separate Hinge from electric
wire and ground wire as shown
above.
6. Remove the fridge door by lifting
it upward.
Be careful not to drop and
scratch the fridge door.
1. Separate the Cap on the Middle
Hinge.
2. After removing one screw and two bolts, remove the Middle Hinge.
(Unscrew the screws with the screwdriver(+) and hex bolts with the
3/16inch hex wrench.)
Removal of the freezer door (swing tyPE - RB215,RB195)
Middle Hinge
Setting up your Refrigerator
Removal of the fridge door
1. After removing the screw, remove
the upper Hinge Cover.
2. Disconnect electric wire on the
top of the refrigerator.
3. With the 7/16 inch wrench,
remove the three bolts that
hold the hinge on the top of the
refrigerator.
Hinge Cover
Be careful not to drop and scratch the fridge door while removing the fridge door!
WARNING
ground wire