SUUNTO D3 - Manual (Page 19)

17
2.4.3 DOWNTIMER [TIMER D]
The downtimer function is entered by pressing the
S button twice, when the time keeping display is
shown. The text Timerd at the bottom and the mode
indicator (TIME) on the left side of the display indi-
cate that you have entered the Downtimer [TIMEr d]
function (Fig.2.8).
The watch shows the preset time set in the SET mode
(See Chapter 4.3 Timer Settings). Use the + and -
buttons as in the [TIMEr Up] function. When the
countdown fi nishes the watch gives three beeps and
returns to showing the pre-set time (Fig. 2.9). If the
downtimer has been set for a continuous countdown,
the watch begins a new countdown after the previous
one automatically.
Diving with the D3 or performing data transfer will
stop the downtimer. However, it is possible to use
downtimer function normally, if the GAUGE and the
FREE diving modes are disabled (set to OFF, see
chapter 4.4.) In dive mode the down timer cannot be
operated.
FR
E
E
A
C S
Fig. 2.8. The Downtimer of
the Stopwatch is indicated by
the TIMEr d text and a mode
indicator.
FR
E
E
A
C S
R TIME
Fig. 2.9. The Downtimer counts
down from a pre-set time and
the DT mode indicator fl ashes.