SRS Labs WT01-15A1 - Manual (Page 30)

29
Turning the TV On and Off
1 Press the POWER button on
the remote control (or control
panel). The power LED on the
front of the TV changes from
red to green, indicating that
the power has been turned
on.
2
Press the POWER button
again; the power LED
changes from green to red, indicating that the TV is in off mode.
When signal is not detected in PC mode, the power LED turns
amber, indicating that the PC is in standby mode.
Selecting Channels
Press CH UP or CH DOWN
button on the control panel to
select the channel or enter the
specific channel number buttons
on the remote contorl.
Power button/
Power LED
Channel up
Channel down