Sony TC-WE825S - Manual (Page 6)

6
Basic Operations
1 Turn on the amplifier and play the program source you want
to record.
2 Press 1/u (or U), and then press § and
insert a cassette.
3 Set DIRECTION MODE.
• See page 4 for hookup
information.
• See "Dubbing a Tape" (page
13) to make a copy of the
tape.
z
To check the approximate
remaining time on a tape
(TC-WE825S/WE725 only)
1 Locate the end of the
recorded portion on the
tape and press RESET for
the deck you’re using to
reset the tape counter to
“0.00”.
2 Press ) to fast-forward
the tape to its end. The
tape counter shows the
approximate remaining
time.
Note
Since the counter is not a
digital clock, the displayed
value will differ slightly from
the actual elapsed recording
or playing time.
Recording on a Tape
With the side you want to record
facing you
4 Press REC r.
· lights up for recording on the side facing you. If it doesn’t,
press · once.
The tape deck automatically adjusts the recording level (see
page 12). After the AUTO indicator lights up continuously,
stop playing the program source. If you wish to adjust the
recording level manually, see “To adjust the recording level
manually” on page 7.
Do not press 1/u (or U) or § while the tape deck is
operating. If you do so, the tape may be damaged.
To record on Set to
Only one side A
Both sides* a
* Recording stops when the tape reaches the end of reverse side.
3
2 4 5
P R r
§
p ª ·
0
g
)
PAUSE
CLEAR BACK FRONT
REC MUTING REC ON FILTER ON OFF
(AMS) (AMS) 0 ) (AMS) (AMS)
p ª ·
– RMS +
RMS/START
RESET MEMORY RESET MEMORY A B COUNTER
SET CHECK DISPLAY DECK A DECK B A+B REC HIGH/NORMAL
DOLBY NR B C S
RMS AUTO CAL(START P ) DUBBING A B
START(DECK B P )
PITCH CONTROL
+ –
Ø ON ø OFF
A a RELAY
DIRECTION MODE
AUTO REC LEVEL
FADER ARL
π SYNCHRO
PHONES
§
0
1
2
3
4 5 6
7
8
9
10
P R r
PAUSE REC MUTING REC