Sony SLV-AV100UX - Manual (Page 22)

Getting Started 22
Manual setup —
Selecting station
names/setting up
VIDEO Plus+
VIDEO Plus+ is a feature in Sony VCRs that simplifies programming the
unit’s VCR to make timer recordings. To use VIDEO Plus+, each
programme position needs to match its VIDEO Plus+ guide channel. If
the guide channels were not preset in the EASY SET UP procedure, set
them by selecting the station names. If you cannot find the station name
you want, you need to set the guide channel manually. To find the
guide channel numbers, see “Guide channels for VIDEO Plus+” on page
24, or look in the programme guide for your area that features
PlusCode.
• If you want to record satellite broadcasts using VIDEO Plus+, see page
25.
Before you start…
• Press VHS TUNER.
– If the TV doesn’t turn on, turn it on manually.
Press VHS TUNER again if connected with a EURO-AV (Scart)
cable.
– If connected with a EURO-AV (Scart) cable, the TV is automatically
set to VCR reception.
– If connected with only the antenna cable, set the TV to the VCR’s
programme position manually.
1 Lift the top cover of the remote commander.
Press MENU. Then press CURSOR > / . to move the cursor (I) to
VHS MENU, and press EXECUTE.
2 Press CURSOR > / . to move the cursor (I) to SET UP CH & VIDEO
Plus+ and press EXECUTE.
When using the EASY SET UP procedure, skip this step.
The preset channels are displayed on the screen. The station names
and guide channels also appear if the unit’s VCR detected them in
EASY SET UP. “---” in the GUIDE CH column means that the guide
channel has not been preset.
3 Press CURSOR > / . to move the cursor (I) to the row on which you
want to set the station name and guide channel.
To display other pages for programme positions 6 to 60, press
CURSOR
> / . repeatedly.
MENU
EXECUTE
CURSOR
> / . / ? / /
Notes
• The menu disappears
automatically if you don’t
proceed within a few
minutes.
• If you entered an incorrect
guide channel number, press
CURSOR
> / . repeatedly to
reset the ”GUIDE CH”
column to “---.” “---” appears
after “255” (then “1”
appears).
• The unit does not allow you
to enter guide channel
numbers that have already
been set.
VHS MENU
T I
TUNER PRESET
CLOCK SET
SET UP CH & VIDEO Plus+
MER SET / CHECK
SET UP MENU
EXIT
SET :
: EXECUTE
SELECT :
MENU
SET UP CH & VIDEO Plus+
SELECT
5
PROG CH GUIDE
4
3
2
2 –
5
2 7
5 6
6
–
–
–
–
– – –
MOVE PROG
CH
4 1
:
:
ERASE PROG
:
TIMER CLEAR
2
3
4
3
2
1
CH4
BBC2
BBC1
ITV
SELECT
5
PROG CH GUIDE
4
2
–
–
–
–
–
– – –
MOVE PROG
CH
1
3
:
:
ERASE PROG
:
TIMER CLEAR
2
5
2 7
5 6
6
4
3
2
1
CH4
BBC2
BBC1 4
2
3
ITV
SET UP CH & VIDEO Plus+