Sprint Nextel SPRINT PCS VISIO SCP-7000 - Manual (Page 146)

130 Section 2H: Using Your Phone’s Voice Services
Using Voice-Activated Dialing
In addition to Sprint PCS Voice Command (see page 212), you
can use a voice dial tag to automatically dial a phone number
in your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Making a Call Using Voice-Activated Dialing
With the flip open:
1. Press briefly.
2. Follow the system prompts and recite the entry’s Voice
Dial tag into your phone’s microphone.
With the flip closed:
1. Press and hold .
2. Follow the system prompts and recite the entry’s Voice
Dial tag into your phone’s microphone.
Programming Voice Dial Tags
To program a voice dial tag:
1. Select > Tools > Voice Services > Voice Dial > Program.
2. You will be prompted to say the name you want to
program. Say the name after the beep.
Note: To use the Voice Dial function, you must have a stored entry
for
Voice Dial . (See “Programming Voice Dial Tags”below.)
Note: Please set the Voice Prompt feature (see page 54) to on
before using the Voice-Activated Dialing so that you can
hear the voice instruction from the phone. The default
setting is off.