Sharp AL-1650 - Manual (Page 42)

40
ST
A
TUS INDICA
T
ORS
MISFEED REMOVAL
Misfeed removal
3 Close the side cover by pressing the handle on the cover.
● The misfeed ( ) indicator will go out.
Misfeed in the upper paper tray
Before opening the paper tray, be sure to open the bypass tray, lift slightly on
the side cover and slide the cover out until it stops, and then perform steps 1
to 3 described in the “A. Misfeed in the paper feed area” section.
1 Gently lift and pull out the paper tray and remove the
misfed paper.
2 Close the paper tray.
3 Lift slightly on the side cover and slide the cover out until
it stops. Close the side cover by pressing the handle on
the cover.
● The misfeed ( ) indicator will go out.
Misfeed in the lower paper tray
1 Grasp the handle of the lower side cover and gently open
the cover.