Sharp AL-1650 - Manual (Page 17)

15
GETTING ST
ARTED
8 To set the selected paper size, press the PAPER SIZE
ENTER (
) key.
● The selected paper feed location indicator will blink and the corre-
sponding paper size (which is currently set) indicator will light up
steadily. All other indicators will go out.
9 Use the TRAY SELECT ( ) key to select the paper
tray of which the paper size has been changed.
● Each time the TRAY SELECT ( ) key is pressed, a paper tray
will be indicated with a blinking paper feed location indicator.
10 Use the ORIGINAL SIZE ENTER ( ) key to select
the paper size which is set.
● Each time the ORIGINAL SIZE ENTER ( ) key is pressed, a
paper size will be indicated with a paper size indicator.
11 Press the START ( ) key and then the PAPER SIZE
ENTER ( ) key.
● To change the paper size setting of the other tray, repeat steps 9 to 10
after pressing the START (
) key.
LOADING COPY PAPER
Loading copy paper