Sharp AL-1650 - Manual (Page 29)

27
MAKING COPIES 1 Place the original in the document feeder tray or on the
original table.
2 Press the B/W REVERSE ( ) key.
3 Check the copy paper size.
● If you have placed the original on the original table, use the ORIGINAL
SIZE ENTER (
) key to select the original size. Copy paper
of the same size as the original will be automatically selected. If
desired, another paper tray can be selected by pressing the TRAY
SELECT (
) key.
4 Make all other desired copier selections and press the
START (
) key.
B/W REVERSE
The B/W REVERSE feature is used to reverse black and white areas.
● When the B/W REVERSE feature is selected, the exposure mode will be
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is canceled, the MANUAL mode will not
automatically be canceled.
Original Copy
B/W reverse