Samsung Digimax V10 - Manual (Page 87)

87
PictBridge : RESET
Initialises user-changed configurations.
1. Connect the camera to your printer. The [USB] menu
must be set to [Printer] before you connect the camera
to the printer. (See p.83)
2. Use the LEFT and RIGHT buttons to select the [Reset]
menu tab.
3. Use the UP and DOWN buttons to select the desired
submenu value, and then press the OK button.
- If [No] is selected : Settings will not be reset.
- If [Yes] is selected : All print and image settings will be reset.
Default print setting varies depending on the printer manufacturer.
For your printer’s default setting, refer to the user’s guide that came with your printer.
Reset
Move:
No
Yes