Samsung Digimax V10 - Manual (Page 60)

60
Starting play mode
Turn the camera on and select Play mode by pressing the play mode button ( ).
The camera can now play back the images stored in the memory.
If you have turned on the camera by pressing the POWER button, you can press the PLAY
MODE button once to switch to Play mode and press it again to switch to Recording mode.
You can turn the power on with the play mode button. The camera is turned on in play mode.
Press the play mode button again to turn off the camera. Switch the mode dial to change to
another shooting mode while the camera is on.
You can set up the PLAY mode function by using the camera buttons and LCD monitor.
If you press the PLAY button to switch to Play mode, the camera lens will retract into the
camera body for protection of the lens after about 10 seconds.
Playing back a still image
1. Select the PLAY mode by pressing the play
mode button ( ).
2. The last image stored on the memory is
displayed on the LCD monitor.
3. Select an image that you want to view by
pressing the LEFT / RIGHT button.
Press and hold the LEFT or RIGHT button to
play back the images quickly.
Manner mode : Pressing the play mode button for more than 3 seconds changes the
buzzer and start-up sound setting to OFF, even though you may have set these to ON.
Even if the camera’s power is off, you can start the play mode by pressing the play mode
button. Manner mode : Pressing the play mode button for more than 3 seconds changes the
buzzer and start-up sound setting to OFF, even though you may have set these to ON.
Even if the camera’s power is off, you can start the play mode by pressing the play mode
button. Manner mode : Pressing the play mode button for more than 3 seconds changes the
buzzer and start-up sound setting to OFF.
Even if the camera’s power is off, you can start the play mode by pressing the play mode
button.
INFORMATION