Samsung SPH SP-M220 - Manual (Page 44)

3-5 Using
3-5-4. Option
MENU DESCRIPTION
Language Using this function, you can select the language used for the menu screen.
Menu Option • : You can move Menu Position up/down/left/right.
• : You can set the translucency of the menu.
•
---
• : You can set the display time of the menu.
•
<5 sec>-<10 sec>-<30 sec>-<60 sec>-<90 sec>-<120 sec>-
Sound
The projector comes with an internal 7W (mono) speaker.
• <100Hz>-<300Hz>-<1kHz>-<3kHz>-<10kHz>
Filter Check Time Sets the check period for the filter. (Unit: hours)
• -<100>-<200>-<400>-<800>
If the filter usage time is larger than the filter check period, the filter check message is
displayed for 1 minute whenever the projector is turned on.
Filter check message: "".
Auto Power On With Auto Power On, if power is supplied to the projector, it turns on automatically without your press-
ing the Power button.
• -
Sleep Timer With Sleep Timer on, if there is no input signal for the specified time, the projector turns off automati-
cally.
(There must be no button input from the remote control or the top of the projector for the specified
time)
• -<10 min>-<20 min>-<30 min>
Security To deter theft, you can set a password that users must enter when the projector powers on. When
you set a password, the projector will not work without it.
•
•
: Enter your current password and set the protection function to off.
• : Enter a new password and set the protection function to on.
• : Change your current password.
Use the displayed number keys to enter or change the password.
Panel Lock You can disable the buttons on the projector body so that the proj ector can only be ope rated by the
remote control.
• -
Information You can check external source signals, picture setup, and PC picture adjustment.