SOYO SY-7VCA - Manual (Page 88)

BIOS Setup Utility SY-7VCA
84
PNP/PCI Configuration Setup (Continued)
PNP/PCI
Setup Setting Description Note
How to set the BIOS to release the IRQ to the PnP Interrupt pool: Interrupt
Line
PnP / PCI configuration Integrated Peripherals
IRQ 15 IRQ 15: PCI / ISA PnP On-Chip Secondary PCI IDE: disabled
IRQ 14 IRQ 14: PCI / ISA PnP On-Chip Primary PCI IDE: disabled
IRQ 12 IRQ 12: PCI / ISA PnP
Interrupt 12 will be released by the PnP
BIOS automatically if the PS/2 Mouse Port
is not used.
IRQ 7 IRQ 7: PCI / ISA PnP Onboard parallel port: disabled
IRQ 4 IRQ 4: PCI / ISA PnP Onboard Serial port 1: disabled
IRQ 3 IRQ 3: PCI / ISA PnP Onboard Serial port 2: disabled
4. Your OS may reassign another interrupt to a PCI slot after BIOS passes control
to the OS, especially if you use Windows 95, 98 or NT.
Disabled BIOS will assign IRQ for
VGA/USB port. Assign IRQ
For
VGA/USB
Enabled BIOS won’t assign IRQ for
VGA/USB port. Default
5. Your OS may reassign another interrupt to a PCI slot after BIOS passes control
to the OS, especially if you use Windows 95, 98 or NT.
Auto Default INT Pin
1/2/3/4
Assignment Set to Auto the BIOS will
using IRQs Automatically.