Sharp LL-T1811W - Manual (Page 12)

12
2. Remove the cover.
3. Connect the AC adapter to the monitor's power
terminal.
4. Replace cover.
5. Connect power cord to AC adapter.
Fitting the AC adapter inside the stand
Wind the cord
Place adapter
inside stand cavity.
6. Replace stand cover.
7. Place power plug into AC outlet.
Connecting the monitor to a power source
Use only the AC adapter supplied.
Notes:
-
Do not overly bend the cable or add extension
cords as this could lead to malfunction.
1. Remove the stand cover.
Connecting the monitor and turning
the monitor on and off
Power cord
(Rear View)
Stand cover
Lift one side
Cover
Cover
Stand cover
Place cord
on hook
AC adapter
Run cord
through hole.
Power terminal