Schumacher Power Inverter PID-410 User Manual
Page 13
• 13 •
•
– The continuous load demand from the device exceeds the inverter’s
wattage output.
•
– The inverter is overheated and automatically turns off for a period
of 1 to 3 minutes to cool. Make sure the inverter is well ventilated. It will
automatically restart after it cools.
•
– The vehicle’s battery voltage is less than 10.5-volts.
•
– Short circuit, power surge or overload in the device.
IF THE INVERTER FUSE BLOWS
8.
Your power inverter is fitted with a fuse, which should not have to be replaced under
normal operating conditions. A blown fuse is usually caused by reverse polarity or a
short circuit within the device or equipment being operated.
If the fuse does blow, take the inverter to a qualified technician for repair.