Sherwood Enviro EG40 DV - Manual (Page 30)

Secondary Installation
CAUTION: NEVER OPERATE THIS APPLIANCE WITH THE GLASS DOOR REMOVED.
Place the log set into the firebox.
Locate each log by seating it down
onto the burner tray support pins.
Follow Figures 31 to 34 proper log
placement.
Upon the first light up, watch for
ignition to ALL burner ports. If a
long delay is noted: First, wait for the
appliance to cool down.
• Open the front door of the
appliance.
• Check to carefully reposition the
embers making sure that burner
ports are not plugged solid or
blocked.
See M
AINTENANCE
A
ND
S
ERVICE
on how to
remove door to clean glass.
Figure 34: Log Placement with Embers.
Figure 35: Appliance Burning.
Figure 33: Step 4 of Log Placement.
30