2 code and learn setting key – Sunwave Tech. SRC-3000b User Manual

Page 15

3.2 Code and Learn Setting Key

SRC-3000b is equipped with two functions, pre-code and

Learning Function, to get the right codes for your target
devices.

Pre-Code

You may configure all keys on SRC-3000b by entering
a specific four-digit code number. This may be the

fastest way to program the SRC-3000b. To get the

specific code number, please refer to the supplied
pre-programmed code list.
However, it requires that the device you intend to

program is included in the pre-programmed code
database. Some newer or less-common devices may

not be pre-programmed, and their codes must be

learned by using the Learning Function.

Learning Function

You can use this function to learn the IR codes
directly from another remote control. This function is

perfect for newer or less common devices. You can

also use the function if a certain key does not perform
the desired function after using the CODE function.
However, if you have the problem that the SRC-3000b
cannot learn your device codes, please refer to

“Troubleshooting” on page 36 or contact SUNWAVE.