Sony RDR-VX500 - Manual (Page 98)

98
4
Select “Auto Preset,” and press ENTER.
All receivable channels are preset in
numerical sequence.
Manual Set
Presets or disables channels manually.
If some channels could not be set using the Auto
Preset or Easy Setup function, you can set them
manually.
1
Follow steps 1 to 3 of “Using the Setup
Displays” on page 96 to select “Tuner Preset”
in the “Setup” display.
2
Select “Antenna/Cable,” and press ENTER.
“Antenna”: Presets VHF and UHF channels.
“Cable”: Presets cable TV channels.
3
Select an option, and press ENTER.
4
Select “Manual Set,” and press ENTER.
5
Select the channel you want to preset/disable
using
M/m or CH +/–, and press ENTER.
6
Select “Add” or “Erase” using
press ENTER.
7
To preset or disable another channel, repeat
steps 5 and 6.
3, 4 Ch Out
Set the RF output channel so that the TV can
receive the correct signal from the recorder.
For details, see page 19.
1
Follow steps 1 to 3 of “Using the Setup
Displays” on page 96 to select “Tuner Preset”
in the “Setup” display.
2
Select “3, 4 Ch Out,” and press ENTER.
“3CH”: when using channel 3 to receive the
recorder signal.
“4CH”: when using channel 4 to receive the
recorder signal.
3
Select “3CH” or “4CH,” and press ENTER.
The confirmation messages will be displayed
for a while.
Guide Channel Setup
Sets up the guide channel number assigned to each
channel.
You need to set this correctly to make timer
recordings with the VCR Plus+ function. For
details, see page 32.
Setup
Disc Setting
Edit
Searching for receivable channels: 3
Scanning... Please wait.
Auto Preset
Title list
7%
Stop
Timer
10:10 AM
Setup
Disc Setting
Edit
Antenna/Cable
Auto Preset
Manual Set
3,4 Ch Out
Guide Channel Setup
Tuner Preset
: 3CH
Title list : 4:3 Letter Box
: On
Antenna
Cable
Timer
10:10 AM
Setup
Disc Setting
Edit
Select a channel:
Manual Set
Title list
Add Erase
69
Timer
10:10 AM
Setup
Disc Setting
Edit
Timer
Antenna/Cable
Auto Preset
Manual Set
3,4 Ch Out
Guide Channel Setup
Tuner Preset
: 3 CH
Title list : Cable
3CH
4CH
10:10 AM