Sony BLU-RAY DISC BDP-SX1000 - Manual (Page 21)

21
Se
tti
n
gs an
d Adj
u
st
m
ent
s
Audio Settings
Audio (HDMI)
BD Audio MIX Setting
DTS Neo:6
Audio DRC
Downmix
Auto Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
PCM Outputs PCM signals from
the HDMI OUT jack.
On Outputs the audio obtained
by mixing the interactive
and secondary audio to the
primary audio.
Off Outputs the primary audio
only. Select this to output
HD audio signals to an AV
amplifier (receiver).
Cinema Performs “DTS Neo:6
Cinema” mode decoding. A
source recorded in 2-channel
format is decoded into 7
channels.
Music Performs “DTS Neo:6
Music” mode decoding. A
source recorded in 2-channel
format is decoded into 7
channels. This setting is
ideal for normal stereo
sources such as CDs.
Off Turns off “DTS Neo:6”
decoding.
Auto Performs playback at the
dynamic range specified by
the disc (BD-ROM only).
Other discs are played back
at the “On” level.
On Performs playback at a
standard compression level.
Off No compression works. A
more dynamic sound is
produced.
Surround Outputs audio signals with
surround effects. Select this
when connecting an audio
device that supports Dolby
Surround (Pro Logic)
*1
or
DTS Neo:6
*2
.
Stereo Outputs audio signals
without surround effects.
Select this when connecting
an audio device that does not
support Dolby Surround
(Pro Logic) or DTS Neo:6.
*1
*2