beautypg.com

Appendix, Fabric care chart – Samsung SilverCare WF306BAW User Manual

Page 24

background image

F-1 SAMSUNG Clothes Washer Owner’s Instructions

Appendix

FABRIC CARE CHART

The following symbols provide garment care directions without words. The care label will include, in

order, four symbols: washing, bleaching, drying and ironing, or dry cleaning when necessary. The use of

symbols ensures consistency among garment manufacturers of domestic and imported items. Follow

care label directions to maximize garment life and reduce laundering problems.

Wash Cycle

Special Instructions

Warning Symbols for Laundering

Normal

Line Dry/ Hang
to Dry

Do Not Wash

Permanent Press/ Wrinkle
Resistant/ Wrinkle Control

Drip Dry

Do Not Wring

Gentle/Delicates

Dry Flat

Do Not Bleach

Hand Wash

Heat Setting

Do Not Tumble Dry

Water Temperature**

High

No Steam (added to iron)

Hot

Medium

Do Not Iron

Warm

Low

Cold

Any Heat

Bleach

No Heat/Air

Any Bleach (when needed)

Iron-Dry or Steam Temperatures

Line Dry/ Hang to Dry

Only Non-Chlorine
(color-safe)
Bleach (when needed)

High

Drip Dry

Tumble Dry Cycle

Medium

Dry Flat

Normal

Low

Permanent Press/ Wrinkle
Resistant/ Wrinkle Control

Dryclean

For machine-washable
wool. Loads should be
under 8 pounds.

Gentle/ Delicates

Dry Clean

Do Not Dry Clean

** The dot symbols represent appropriate wash water temperatures for various items. The

temperature range for Hot is 105° - 125° F/ 41° - 52°C, for Warm 85° - 105° F/29° - 41° C and for Cold

60° - 85° F/16° - 29° C. (Wash water temperature must be a minimum of 60° F/16°C for detergent

activation and effective cleaning.)
The clothes Washer may not ensure these temperatures because the actual water temperatures

entering your Washer are dependent on water heater settings and regional water supply

temperatures. For example, cold water entering the home in the northern states during winter

may be 40° F/4° C which is too cold for effective cleaning. The water temperature in this situation

will need to be adjusted by selecting a warm setting, adding some hot water to the MAX FILL line

or using your Washer’s heating option, if available.

This manual is related to the following products: